离子色谱法测定不同地区家庭饮用井水中的阴、阳离子

采用离子色谱法测定不同地区家庭饮用井水中氟离子、氯离子、硝酸根、硫酸根、钠离子、钾离子、镁离子和钙离子等8种阴、阳离子的含量。样品经IonPac AS11-HC型分离柱及IonPac AG11-HC型保护柱分离,以30mmol·L-1氢氧化钾溶液为淋洗液(阴离子分析);样品经IonPac CS12A型分离柱及IonPac CG12A型保护柱分离,以20 mmol·L-1甲基磺酸溶液为淋洗液(阳离子分析);采用电导检测器检测。8种离子在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3s)在0.002~0.034mg·L-1之间。对井水样品进行测定,测定值的相对标准偏差(n=6)在0.59%~2.0%之间。用标准加入法做方法的回收试验,计算得回收率在98.3%~109%之间。     

A facile and versatile protocol for the one-pot PhI(OAc)2 mediated divergent synthesis of quinazolines from 2-aminobenzylamine

In this present work iodobenzenediacetate (PIDA) has been found to be the key reagent in absence or presence of catalytic amount of molecular iodine (I₂)/zinc chloride (ZnCl₂) to construct quinazoline scaffold from 2-aminobenzylamine and a variety of easily available aldehydes, aryl and aliphatic amines, aliphatic and aryl alcohols and nitriles. This protocol provides mild and robust conditions along with great versatility to synthesize 2-substituted quinazolines from diverse starting materials in good to excellent yields. The developed protocol is also well applicable to reactants containing ease to oxidation prone functional groups.     

Well Oriented ZnO Nanorods Array: Negative Resistance and Optical Switching

Well‐oriented ZnO nanorods (NRs) arrays were grown on Si, alumina, quartz, and FTO substrates through a ZnO seed layer followed by low temperature wet chemical process. The influence of sputtered ZnO seed layer thickness (100, 50, 32, and 16 nm), annealing temperature and CuO_x coverage on the characteristics of ZnO NRs were investigated in this study. The crystalline structural, chemical, morphological, optical, and electrical properties of ZnO NRs arrays were studied by X‐ray diffraction (XRD), field emission‐ scanning electron microscopy equipped by energy dispersive X‐ray spectroscopy (FE‐SEM/EDX), Raman scattering, UV/Vis ‐ near IR absorption spectroscopy and current‐voltage characteristic. XRD and Raman spectra measurement revealed that the synthesize ZnO displayed hexagonal wurtzite structure. The individual rod diameter, density, and orientation can be controlled by varying the seed layer thickness. The mean diameter and maximum length of ZnO NRs are around 55–66 nm and 282 nm, respectively. ZnO NRs/ ZnO thin film structure shows optical switching and negative differential resistance behavior as applicable to ON/OFF gate and memory devices.     

On the stability of Timoshenko-type systems with internal frictional dampings and discrete time delays

In this paper, we consider a vibrating system of Timoshenko-type in a bounded one-dimensional domain under Dirichlet–Dirichlet or Dirichlet–Neumann boundary conditions with one or two discrete time delays and one or two internal frictional dampings. First, we show that the system is well posed in the sens of semigroup theory. Second, we prove the exponential stability regardless to the speeds of wave propagation of the system if the weights of the time delays are smaller than the ones of the corresponding dampings, respectively. However, when the weight of one time delay is not smaller than the one of the corresponding damping, we prove the exponential stability in case of equal-speed wave propagation, and the polynomial stability in the opposite case.     

The nonrelativistic limit of relativistic Vlasov–Maxwell system

We consider the one and one‐half dimensional multi‐species relativistic Vlasov–Maxwell system with non‐decaying (in space) initial data. We prove its well‐posedness and nonrelativistic limit as the speed of light . These results mainly rely on a delicate analysis of energy structure and application of estimates along the characteristic lines. Copyright © 2016 John Wiley & Sons, Ltd.     

Global well‐posedness of 2D nonlinear Boussinesq equations with mixed partial viscosity and thermal diffusivity

In this paper, we discuss with the global well‐posedness of 2D anisotropic nonlinear Boussinesq equations with any two positive viscosities and one positive thermal diffusivity. More precisely, for three kinds of viscous combinations, we obtain the global well‐posedness without any assumption on the solution. For other three difficult cases, under the minimal regularity assumption, we also derive the unique global solution. To the authors' knowledge, our result is new even for the simplified model, that is, F(θ) = θe₂. Copyright © 2017 John Wiley & Sons, Ltd.     

A nonhomogeneous boundary value problem for the Kuramoto–Sivashinsky equation in a quarter plane

We study the initial boundary value problem for the one‐dimensional Kuramoto–Sivashinsky equation posed in a half line with nonhomogeneous boundary conditions. Through the analysis of the boundary integral operator, and applying the known results of the Cauchy problem of the Kuramoto–Sivashinsky equation posed on the whole line , the initial boundary value problem of the Kuramoto–Sivashinsky equation is shown to be globally well‐posed in Sobolev space for any s >?2. Copyright © 2017 John Wiley & Sons, Ltd.     

Global well‐posedness of the 2D Euler‐Boussinesq system with stratification effects

This paper is concerned with the Cauchy problem of the two‐dimensional Euler–Boussinesq system with stratification effects. We obtain the global existence of a unique solution to this system without assumptions of small initial data in Sobolev spaces. Copyright © 2017 John Wiley & Sons, Ltd.     

Well‐posedness of initial boundary value problems on longitudinal impact on a composite linear viscoelastic bar

We investigate the correctness of the initial boundary value problem of longitudinal impact on a piecewise‐homogeneous semi‐infinite bar consisting of a semi‐infinite elastic part and finite length visco‐elastic part whose hereditary properties are described by linear integral relations with an arbitrary difference kernel. Introducing nonstationary regularization in boundary conditions and in the contact conditions, the well‐posedness of the considered problem is proved. Copyright © 2017 John Wiley & Sons, Ltd.     

Numerical study of a well boat operating at a fish farm in current

Dynamic response of a well boat operating at a fish farm in current is investigated numerically. An objective is to determine the operational conditions of the well boat. In terms of the fish farm, a realistic set-up (with single cage) is considered, including a floating collar, an elastic sinker tube, a flexible-closed net cage and a complex mooring system. A time-domain solution is used to find the steady configuration and response. Transverse viscous current loads are estimated using the cross-flow principle. The drag coefficients are obtained empirically by considering cross-sectional details, free surface and three-dimensional (3D) flow effects. The drag force is experimentally validated. The effect of the ship wake on the net loading is also assessed.The most critical scenario with the well boat placed at the weather side of the fish farm is analyzed in detail. Critical response variables for operational limits are the maximum anchor-line tensions and floater stresses. Numerical results show that the anchor loads will increase more than 40% in small current velocities and up to 90% in high current velocities due to the viscous current loads on the boat. There is also a strong increase of the floating collar deformations and stresses when the well boat is in contact with the floating collar.A sensitivity analysis has been carried out to identify the physical parameters affecting the anchor loads and the maximum stress in the floating collar. From our studies, the anchor loads are more sensitive to current direction, bottom weight system, sinker tube depth and mooring line properties (pretension load, anchor chain weight, etc.) and less sensitive to other parameters such as floating collar stiffness and cross-sectional drag coefficients of the well boat. The shading effect of the well boat on the fish-farm inflow has been examined and appeared not negligible with 4% to 10% reduction of the anchor loads for the studied current conditions. The maximum stress in the floating collar is sensitive to well-boat loads related parameters (current direction, cross-sectional drag coefficient) and pretension load in the anchor line; not so sensitive to net loading related parameters such as sinker tube depth and sinker tube weight.Lastly, the operational conditions of the well boat at the fish farm were discussed. Numerical results show that the maximum stresses in the floating collar should be of major concern. The loads in the mooring lines are moderate compared with the corresponding breaking limits.